• Company Design

Nexxtender Base

Nexxtender Base is the most simple charging station, its upgrade.  The installation is very easy and can be done by your trusted electrical contractor. In addition to being safe and powerfu No specialized technician needed. Good bye obsolescence. Hello Modularity!

Features

With the Nexxtender BASE, you can recharge all available electric cars.

Depending on the connection and the type of the vehicle, you will get following charge speeds:

  • 1 Phase 16 A: 3.7 kW (17 km per hour)
  • 3 Phases 16 A: 11 kW (50 km per hour)
  • 1 Phase 32 A: 7.2 kW (35 km per hour)
  • 3 Phases 32 A: 22 kW (100 km per hour) 

Switch to another configuration

Description

The Single Wallbox presents one Type 2 connector in a beautiful design. It can be upgraded to the Advance version very easily as shown in the video. Nexxtender Fox Wallbox can be installed indoor or outdoor. A wall, a grid connection and a SIGFOX signal are all you need.

Description

Nexxtender Base Wallbox can be installed indoor or outdoor. In the Dual version, each socket can deliver up to 22 kW.

Description

The Pole is the ideal solution for the integration of the Nexxtender BASE in a parking lot. The stainless steel Pole contains an electrical cubicle including a circuit breaker and a differential protection. The pole can be personalised to the the visual identity of your company.

Description

The Pole is the ideal solution for the integration of the Nexxtender base in a parking lot. The stainless steel Pole contains an electrical cubicle including a circuit breaker and a differential protection. In the dual version, each connector can deliver up to 22 kW. 

The connection can be done with one or two cables. If the connection is made with one cable, the load can be made available to one connector if the other one is free.

Accessories

T2S Connector

T2S Connector

Wood support structure (for Single or Dual)

Wood support structure (for Single or Dual)

Cable holder

Cable holder

Videos

How to upgrade a Nexxtender

How to upgrade a Nexxtender

Accessories

T2S Connector

T2S Connector

Wood support structure (for Single or Dual)

Wood support structure (for Single or Dual)

Cable holder

Cable holder

Accessories

T2S Connector

T2S Connector

Cable holder

Cable holder

Pole personnalisation

Pole personnalisation

Accessories

T2S Connector

T2S Connector

Cable holder

Cable holder

Pole personnalisation

Pole personnalisation

Specifications

  • IEC Compliant Mode 3 per IEC 61851
  • Vehicle Interface Type 2 connector
  • Voltage and Current Rating From 230V AC at 16A to 400V AC at 32A
  • Charging Power Output From 3.7 kW to 22 kW
  • Electrical Protection 30mA Residual Current Device
  • Environment IP 54 Indoor/Outdoor
  • Status LED Indication
  • Standby Power 5.3 VA
  • External casing Polystyrene
  • Internal casing Stainless steel
  • Mechanical Protection IK 10
  • Upgrade Upgradable to Nexxtender Advance
  • Network SIGFOX
  • Communication Own Protocol
  • Operating Humidity Up to 95% non-condensing
  • Operating Temperature -20°C + 60°C
  • Cable not included
  • Approximate Shipping Weight 5 kg (Single) 7.5 kg (Dual)
  • Dimensions (HxWxD) 327 x 247 x 123 mm (Single) 527 x 247 x 123 mm (Dual)